元器件交易网www.cecb2b.com
www.cecb2b.com
LEDLED LAMP■LED LAMPS
(I F = 20 mA*1, Ta = 25°C)Resin typeK GE GF GH YH SH DP RyeyccnGreenYellow-greenYellow-green (HL)YellowSunset orangeRedRednRadiation cnerayyyyyyyrshape neratttttttiiiiiiiaoapissssssseps(mm)snnnnnnnusnnpeeeeeeefnaotttttttfripn..n...n.n.iatsiiiiAdr PniP Pni PniP P Pt sussssddsffiuY sYuYuY sYsYuYeeeoTuTT oTTuTu oT ldrrr n)o))o)o)o)n)oooyidnidnidnidnidnididlllkooolimcccccmcCCCM(555 nm)umm(565 nm)umm(565 nm)ummmc(585 nm)um(610 nm)umm(635 nm)umumL(((( L L L( L( L (695 nm)L( ●GL3KG830GL3EG860GL3HY855GL3HS860GL3HD840GL3PR88●GL3EG41130●GL3KG4460GL3EG44130GL3HY44100GL3HS44100GL3HD44110GL3PR4412ø3●GL3KG4320GL3EG4338GL3HY4325GL3HS4325GL3HD4325GL3PR433●GL3KG6222GL3EG6265GL3HY6240GL3HS6240GL3HD6250●GL3KG636GL3EG6318GL3HY6316GL3HS6315GL3HD6317GL3PR632●LT3E31W*218LT3H31W*215LT3D31W*215LT3P31W*21.5●LT3E65W*225LT3H65W*225LT3S65W*225LT3D65W*225LT3P65W*23ø4●GL4KG830GL4EG8100GL4HY8110GL4HS880GL4HD8110GL4PR815redGL5EG420GL5HD425GL5PR43n●ilyC●GL5KG860GL5EG8150GL5HY8120GL5HS880GL5HD880GL5PR815●GL5KG4170GL5EG41160GL5HY41100GL5HS41100GL5HD41150GL5PR4115●GL5KG4470GL5EG44160GL5HY44100GL5HS44100GL5HD44100GL5PR4415ø5●GL5EG261B0SB150GL5HD261B0SB80GL5PR261B0SB15●GL5EG40250GL5HY40250GL5HS40200GL5HD40250GL5PR4035●GL5KG43120GL5EG43300GL5FG43600GL5HY43250GL5HS43250GL5HD43300●GL5EG6023GL5HD608●GL6EG11T*3120ø5 (Inverted GL5EG4715GL5HS476GL5HD478cone)●OvalLong: 5.8Short: 4.6●GL6EG26T*3140Convexø2●GL2EG615GL2HY612GL2HD612GL2PR61.5Arch2.5 × 5.0●GL8EG230GL8HD2302.0 × 3.1●GL8EG450GL8HD4401.8 × 3.9●GL8KG421.5GL8EG425GL8HY426GL8HD425GL8PR420.71.9 × 3.9●GL8EG528GL8HY525GL8HD522el2.0 × 3.2●GL8KG259GL8EG2512GL8HY2512GL8HS2510GL8HD2512GL8PR251.5gnatc2.0 × 3.2●GL8KG295GL8EG2912GL8HY2910GL8HS297GL8PR293eR2.0 × 4.5●GL8EG236GL8HY238GL8HD2362.0 × 5.0●GL8KG214GL8EG218GL8HY218GL8HS218GL8HD218GL8PR210.7●GL8KG264GL8EG268GL8HY268GL8HD268GL8PR260.7Square5.0 × 5.0●GL8KG223.5GL8EG226GL8HY225GL8HS225GL8HD228GL8PR221.2TriangleIsosceles triangle●GL8PR280.9*1PR series (Red): I F = 5 mA (GL8PR25, GL8PR29: IF = 10 mA) Taped model is also available.
*2Taped model*3With tie-barHL: High-luminosity
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
DEL97
www.cecb2b.com
LED LAMPCylinderLEDGL3PR8 seriesGL3PR44 seriesGL3HY43 seriesGL3KG62 seriesLT3E31W seriesGL3PR63 seriesLT3E65W seriesGL4PR8 seriesGL5PR4 seriesGL5HS8 seriesGL5KG41 seriesGL5PR44 seriesGL5EG40 seriesGL5HY43 seriesGL5EG60 seriesGL6EG11TGL5HD47 seriesOvalConvexArchGL6EG26TGL2HY6GL8EG2 seriesGL8HD4 seriesRectangleGL8KG42 seriesGL8KG25 seriesGL8HY29 seriesGL8HD23 seriesGL8HS21 seriesGL8HY26 seriesSquareTriangleGL8HD22 seriesGL8PR2898
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
www.cecb2b.com
LEDDICHROMATIC LED LAMP■DICHROMATIC LED LAMPS
(The values in luminous intensity are radiation color order) (I F = 20 mA*1, Ta = 25°C)Resin typeE JJC U❇E PE DE HH PeYellow- OrangeYellow- RedYellow- Yellow- cnRadiation green (HL)+ green (HL)+green +Red+ RedYellow- Yellow + Redgreen green + Yellowa rshape yyyyyyattttttiiiiiie(mm)sssssspyynnnnnnpcceeeeeenttttttA nnni.n.n.n.n.i. sn eesrnsPi Pi Pi Pi PsPddreaouYsYsYsYsYuYeoiealoTuTuoTuTuToTrsrprp in o)n )n o o )n)n)n oososys)iiiilulofnkufonlomdcmdcmdididcccmdcCialfifdCarriuuuutCtMdLm(Lm(Lmmummum(L(L(Lm(ø3●GL3ED820/15re●40/9GL5ED540/25GL5HP515/9dGL5EJJ502C0X*2110/170GL5EP5nilyCø5●GL5CU44100/240GL5ED4480/50●GL5ED6011/8●GL6CU7120/250elg1.9 × 3.9●GL8ED510/6.5GL8HP53/1.5natc2.0 × 5.0● GL9ED28/3GL9EH26/2GL9HP21/0.8eR5.0 × 5.0●GL9ED47/4❇CU series: Common anode pin connection *1 P (Red) and H (yellow): IF = 10 mA *2 Taped model HL: High-luminosity
GL3ED8GL5EJJ502C0XGL5ED5 seriesGL5ED44 seriesGL5ED60 seriesGL6CU7GL8HP5 seriesGL9ED2 seriesGL9ED4Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
DEL99
www.cecb2b.com
HIGH-LUMINOSITY CHIP LED■HIGH-LUMINOSITY (AlGaInP) CHIP LEDs (Taped models only)
Resin typeOutline dimensions (mm)LED✩New product
★Under development
(I F = 20 mA, Ta = 25°C)
Colorless transparencyColored transparencyZ GGreenZ EJ ELuminous Yellow-greenLuminous intensity intensity (mcd) (mcd) TYP.TYP.GM1JE35200AE*1GM1JE55200AE*1131325.4Colored diffusionZ VJ VY VAmberZ SJ SY SSunset orangeZ JJ JY JOrangeZ RJ RRedMilky diffusionLuminous intensity (mcd) TYP.Luminous intensity (mcd) TYP.19Luminous intensity (mcd) TYP.1919123.375127.8609.520070500Luminous intensity (mcd) TYP.131.6 × 0.8 (T: 0.35)1.6 × 0.8 (T: 0.55)●●
●
GM1JV35200AE*118.8GM1JV55200AE*116.8LT1ZV67AGM1JS35200AE*1GM1JJ35200AE*1GM1JJ55200AE*1LT1ZJ67AGM1JR35200AE*1GM1JS55200AE*120.9LT1ZS67ALT1ZG67A6.1LT1ZE67A78.77516.592.7601117080123.27514.1144.1781229090LT1ZR67A73.95578.7551.6 × 0.8 (T: 0.8)●●●
GM1ZV80300AELT1JV67A*1LT1ZG40AGM1ZS80300AELT1JS67A*1LT1ZS40AGM1ZJ80300AELT1ZJ40AGM1ZR80300AELT1ZR40A6.2LT1ZE40A28.2LT1ZV40A2.0 × 1.25 (T: 0.8)●●
GM1ZV40300AEGM1JV40300AELT1ZG95AGM1ZS40300AEGM1JS40300AELT1ZS95AGM1ZJ40300AEGM1JJ40300AELT1ZJ95AGM1ZR40300AE3.2 × 2.8 (T: 1.9)●●●●●●●
●
15LT1ZE95A45LT1ZV95AGM5ZR95200AE100GM5ZR01200A*3400GM5JV95200AEGM5JS95200AEGM5JJ95200AEGM5ZJ01200A*36.0 × 5.0 (T: 2.5)6.0 × 5.0 (T: 2.3) (board insertion type)1.6 × 1.15 (T: 0.8) (Side emitting)2.7 × 1.3 (T: 1.2) (Side emitting)*1*2*3*4
GM5ZV01200A*3500GM5YV01210A*41 300GM5ZV03200Z*3500GM4JV81200AE*235GM5ZS01200A*3700GM5YS01210A*41 700GM5ZS03200Z*3700GM4JS81200AE*240GM5YJ01210A*41 500GM5ZJ03200Z*3GM4JJ81200AE*250040GM5ZR03200Z*3400GM4JR81200AE*2★GM4JR81250AE*230(45)LT1JV45A*120LT1JS45A*124LT1JJ45A*116LT1JS67A, LT1JV67A, GM1JV55200AE series, GM1JV35200AE series, GM1JV40300AE series, LT1JV45A series: IF = 5 mAGM4JV81200AE series: IF = 10 mA
GM5ZR01200A series, GM5ZR03200Z series: IF = 60 mAGM5YV01210A series: IF = 90 mA
100
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
www.cecb2b.com
LEDHIGH-LUMINOSITY CHIP LED✩★New product
Under development
■HIGH-LUMINOSITY (InGaN) CHIP LEDs (Taped models only)
(I F = 10 mA, Ta = 25°C)Resin typenOutline yyB CG Cccoinnsdimensions eseuBlueGreen fdndrf (mm)eoasriierpeadlr Luminous Luminous ososrpylulofnoslnkfoaoaliintensity intensity CidCrtCrtM(mcd) TYP.(mcd) TYP.1.6 × 0.8 (T: 0.35)●GM1GC35200AC54●★GM1BC35370AC*1231.6 × 0.8 (T: 0.55)●★GM1BC55270AC*123GM1GC55200AC47●GM5BC95200AC*273GM5GC95200AC*23113.2 × 2.8 (T: 1.9)●★GM5BC95250AC*2120★GM5GC95250AC*2500●★GM5BC95270AC*2370●GM5BC01200AC*3200GM5GC01200AC*35206.0 × 5.0 (T: 2.5)●★GM5BC01250AC*3300★GM5GC01250AC*31 200●★GM5BC01270AC*35506.0 × 5.0 (T: 2.3)●GM5BC03200Z*3200GM5GC03200Z*3520board insertion type●✩GM5BC03210Z*33001.6 × 1.15 × 0.8(Side emitting)●★GM4BC81250AC50★GM4GC81250AC1702.7 × 1.3 × 1.2(Side emitting)●GM4BC13300AC12GM4GC13300AC46*1GM1BC35370AC, GM1BC55270AC: IF = 5 mA
*2GM5BC95200AC series, GM5BC95250AC series: IF = 20 mA
*3GM5BC01200AC series, GM5BC01250AC series, GM5BC03200Z series: IF = 50 mA
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
DEL101
www.cecb2b.com
CHIP LED■CHIP LEDs (Taped models only)
Resin typeColorless transparencyColored transparency(IF = 20 mA*1, Ta = 25°C)
LEDKLuminous intensity (mcd) TYP.GreenEFEGLuminous intensity (mcd) TYP.Yellow-greenH H YYellowLuminous intensity (mcd) TYP.11.59.88.310.8Colored diffusionMilky diffusionOutline dimensions (mm)1.6 × 0.8 (T: 0.35)1.6 × 0.8 (T: 0.55)1.6 × 0.8 (T: 0.6)1.6 × 0.8 (T: 0.8)2.0 × 1.25 (T: 0.8)3.2 × 2.8 (T: 1.9)1.6 × 1.15 × 0.8 (Side emitting)2.7 × 1.3 × 1.2 (Side emitting)●●●●●●●●●GM1EG35200AGM1EG55200ALT1E97ALT1E67ALT1F67ALT1F67AFLT1E40AGM5EG95200AGM4EG81200ALT1E45A191923231918.12029GM1HY55200ALT1H97ALT1H67ALT1H40A LT1K67ALT1K40A3.85Resin typeColorless transparencyColored transparencySH SLuminous intensity (mcd) TYP.Sunset orange D H DLuminous intensity (mcd) TYP.RedU U RRed (HL)Luminous intensity (mcd) TYP.RedPLuminous intensity (mcd) TYP.1.61.31.3Colored diffusion1.6 × 0.8 (T: 0.55)1.6 × 0.8 (T: 0.6)1.6 × 0.8 (T: 0.8)2.0 × 1.25 (T: 0.8)3.2 × 2.8 (T: 1.9)*1 P (Red) series: IF = 5 mA
Milky diffusionOutline dimensions (mm)●●●●●GM1HS55200ALT1S97ALT1S67ALT1S40A11.48.26.99.4GM1HD55200ALT1D97ALT1D67ALT1D40AGM5HD95200A12.5118.811.913.8GM1UR55200ALT1U97ALT1U67ALT1U40AGM5UR95200A29.735.329.735.680LT1P97ALT1P67ALT1P40A HL: High-luminosity
LT1D67A seriesLT1ZR67A seriesLT1JS67A seriesGM1ZV80300AE seriesLT1D97A seriesGM1EG55200A seriesGM1JV55200AE seriesGM1BC55250AC seriesLT1E40A seriesLT1ZE40A seriesGM1JV40300AE seriesGM1ZV40300AE seriesGM1JV35200AE seriesGM1EG35200AGM1BC35200AC seriesGM1BC35310ACLT1E45A seriesLT1JV45A seriesGM4BC13300AC seriesGM4JV81200AE seriesGM4EG81200AGM4BC81250AC seriesLT1ZR95A seriesGM5JV95200AE series, GM5EG95200A series GM5BC95200AC series, GM5BC95250AC seriesGM5ZR01200A series, GM5BC01200AC series GM5BC01250AC series, GM5YV01210A seriesGM5ZV03200Z seriesGM5BC03200Z seriesTaped model102
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
www.cecb2b.com
LEDCHIP LED★Under development
■HIGH-LUMINOSITY DICHROMATIC TYPE CHIP LEDs (Taped models only)(I F = 20 mA, [Blue, Green: I F = 10 mA], Ta = 25°C)Resin typenOutline yyZVBCZSGCccoinsdimensions n nseuAmber + BlueSunset orange + Green efdodrsrf (mm)ieieaeadlrsrprp Luminous Luminous ouososylfllkofonnialiintensity intensity CdCaorrtCtM(mcd) TYP.(mcd) TYP.1.6 × 1.6 (T: 0.8)●GM1ZVB80300A43.8/14.4GM1ZSG80300A66/46.1 (I F = 40 mA, Ta = 25°C)Resin typenOutline yyoBCGCBCZRGCZRccinsdimensions n eseuBlue + GreenBlue + RedGreen + Red f (mm)dndrsrfeoeaiieadlrrprp Luminous Luminous Luminous osososylullkoffononliintensity intensity intensity CidCartCartM(mcd) TYP.(mcd) TYP.(mcd) TYP.6.0 × 5.0 (T: 2.5)●GM5BG01210A300/860GM5ZRB01210A300/580GM5ZRG01210A860/580■DICHROMATIC TYPE CHIP LEDs (Taped models only)
(I F = 20 mA, Ta = 25°C)Resin typenOutline yyoEHEDccinsdimensions nuYellow-green + Red esefYellow-green + Yellowdndrsrf (mm)ieoieaarspedlrp Luminous oosrsyLuminous lulofnolnkfoaoaliintensity intensity CidCrrtCtM(mcd) TYP.(mcd) TYP.1.6 × 1.6 (T: 0.8)●LT1EH67A19/8.3LT1ED67A19/8.3GM5BG01210A seriesGM1ZVB80300A seriesLT1ED67A series■HIGH-LUMINOSITY WHITE TYPE CHIP LEDs (with blue chip) (Taped models only) (Ta = 25°C)Outline Color BWdimensionscoordinatesRadiation colorWhite (mm) (x, y)Luminous intensity (mcd) TYP.3.2 × 2.8 (T: 1.9)(0.31, 0.3)White★GM5BW95300A*11 1006.0 × 5.0 (T: 1.5) 6-terminal leadless(0.31, 0.31)White★GM5BW01300A*34 2006.0 × 5.0 (T: 2.5) 4-terminal leadless(0.31, 0.31)White★GM5BW01301A*21 800*1GM5BW95300A: IF = 20 mA *2 GM5BW01301A: IF = 40 mA *3 GM5BW01300A: IF = 35 mA/chip
GM5BW95300AGM5BW01300AGM5BW01301ANotice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
DEL103
www.cecb2b.com
CHIP LED■WHITE TYPE CHIP LEDs (with blue-violet chip) (Taped models only)
Outline dimensions (mm)Color coordinates (x, y) (I F = 40 mA, Ta = 25°C)LED✩New product
★Under development
VARadiation colorLuminous intensity (mcd) TYP.450(700)(350)(900)(0.33, 0.33)6.0 × 5.0 (T: 2.5) 4-terminal leadless(0.34, 0.40)(0.29, 0.27)(0.30, 0.50)WhiteYellowish whitePurplish whiteGreenish whiteGM5VA33331AC★GM5VA34400AC★GM5VA29270AC★GM5VA30500AC ( ) indicates reference value.
GM5VA33331AC■HIGH-LUMINOSITY DICHROMATIC TYPE CHIP LEDs (RGB 3-color) (Taped models only)(Ta = 25°C)Resin typeColored transparencyColored diffusionMilky diffusionOutline dimensions (mm)1.6 × 1.6 (T: 0.55)1.6 × 1.6 (T: 0.8)6.0 × 5.0 (T: 2.5) 4-terminal leadlessColorlesstransparencyWARed + Green + BlueLuminous intensity (mcd) TYP.★GM1WA55360A*1●●●●●●●●●●●●GM1WA80350A*2GM5WA02200A*3GM5WA06203A*3GM5WA06210A*4GM5WA06250A*5GM5WA06260A*3GM5WA06270A*6GM5WA06200Z*3GM5WA06203Z*3GM5WA06250Z*4✩GM5WA05360A*6125/150/5580/92/30850 [Mixed color]850 [Mixed color]250/400/3501 400 [Mixed color]1 725 [Mixed color]3 000 [Mixed color]850 [Mixed color]850 [Mixed color]1 400 [Mixed color]2 200 [Mixed color]6.0 × 5.0 (T: 2.5)*7 6-terminal leadless6.0 × 5.0(T: 2.3 [resin part]) 6-terminal6.0 × 5.0 (T: 1.5) 6-terminal leadless*1*2*3*4*5*6*7
GM1WA55360A: IF = 10 mA (Red, Green, Blue)
GM1WA80350A: IF = 20 mA (Red), IF = 10 mA (Green, Blue)
GM5WA02200A, GM5WA06203A, GM5WA06260A, GM5WA06200Z, GM5WA06203Z: IF = 40 mA (Red, Green), IF = 20 mA (Blue)GM5WA06210A: IF = 40 mA (Red, Green, Blue)
GM5WA06250A, GM5WA06250Z: IF = 35 mA (Red, Green), IF = 20 mA (Blue)GM5WA06270A, GM5WA05360A: IF = 35 mA (Red, Green, Blue)GM5WA06270A: T: 2.4 mm
GM1WA55360AGM1WA80350AGM5WA02200AGM5WA06203AGM5WA06210AGM5WA06250AGM5WA06260AGM5WA06200ZGM5WA06203ZGM5WA06250ZGM5WA06270AGM5WA05360A104
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
www.cecb2b.com
LEDLEDs FOR CAMERA DATA BACK / LED DRIVERS★Under development
■LEDs FOR CAMERA DATA BACK
(I F = 1 mA, Ta = 25°C)
Model No.No. of dotsOutline dimensions (mm)Radiation colorLuminous intensity (mcd)GW01M59001PE72.6 × 2.9 (T: 0.9) Surface-mount typeAmber(MIN. 0.4 TYP. 0.8) ( ) indicates reference value.
GW01M59001PE■LED DRIVERS
Model No.
Description
Function
Supply voltage
(V)
Package
• Output current (constant-current sink outputs) : 30 mA (MAX.) (setup by external resistor)
24-dot LED panel driver• Graduation function (clock cycle setting or external synchronization)★IR2D20N/U
with constant-current sink• Independent current control for three systems (for RGB LED)• LED drive voltage : 15 V
4.5 to 5.5
P-SSOP056-0600/outputs
P-HQFN052-0707
• Rated output voltage : 20 V (MAX.)
• fCLK : 20 MHz (MAX.) /16.6 MHz (MAX.) (at cascade connection)16-dot LED panel driver• Output current (constant-current sink outputs) : 60 mA (MAX.)★IR2D07N1
with constant-current sink (setup by external resistor)
• Rated output voltage : 7 V (MAX.)
3.0 to 5.5P-SSOP040-0300
outputs
• fCLK : 20 MHz (MAX.) /16.6 MHz (MAX.) (at cascade connection)
• Output current : 155 mA/ch (MAX.) (3ch) (in flash mode)• Control by I2★IR2E46U6/Y6
RGB LED driver forC bus
flash lights and illuminations • Illumination mode (64 levels/ch)2.7 to 4.5
P-VQFN032-0505/• Flash mode (32 levels/ch)
WL-CSP*1
• Brightness adjustment
• Output current : 20 mA (MAX.) (setup by external resistor)• Independent current control for two systems★IR2E47U6
(4 outputs and 2 outputs)
P-VQFN024-0404
• LED non-connected judging function (*2)
White LED driver for
• Brightness adjustmentback light
2.7 to 5.5
• Output current : 20 mA (MAX.)
★IR2E48U6
• LED non-connected judging function P-VQFN024-0404
• Brightness adjustment
*1 WL-CSP : Waferr-level CSP
*2 Contact a SHARP sales office regarding a wafer-level CSP.
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
DEL105
因篇幅问题不能全部显示，请点此查看更多更全内容